Halftone (grayscale) Images with K40 Whisperer Open the SVG file you just saved in K40 Whisperer. Within Inkscape select 'Save' to save the design as an SVG file.Ĥ. Adjust the size of the document to match the area you want to export (You can use 'File' - 'Document Properties' - 'Resize Page to Content' to make the page the same size as your design)ģ. (Raster Engraving is not supported for DXF files.)Ģ. Use BLACK and other colors to indicate raster engraving. Use BLUE lines to indicate vector engraving. If a laser works with Laser Draw it should work with K40 Whisperer. The best way to determine if a laser will work with K40 Whisperer before buying is to check if the laser comes with LaserDRW (Laser Draw) software. 6C6879-LASER-M2 ( M2 Nano: This is the default board setting)).6C6879-LASER-M3 ( M3 Nano: For M3 Nano use the default board setting (i.e.(The controller board is the circuit board the USB cable plugs into)Ĭontroller Boards Known to Work with K40 Whisperer: You can also look at the markings on the controller board. To see which board you have you can go to 'Properties' from the LaserDRW (or CorelDraw) Engraving Manager window and look at which board is selected for the 'Mainboard' option. The boards that work with K40 Whisperer are made by Lihuiyu. Only boards that work with LaserDRW will work with K40 Whisperer.

Inkscape manual pdf free download